Find a device on the plant floor¶
Open a device's record at the equipment: its findings, the fix, its maintenance and its backups. You can use the QR label, the asset tag, or any code already on the equipment.
Role: anyone signed in to your organization. Viewers can look; assigning codes needs owner, admin or editor.
Scan a QR label¶
With the phone's camera app: point it at the label and open the link. It goes to breachspider.com. If you are signed in, the device opens. If not, BreachSpider asks you to sign in first and then opens the device.
Inside BreachSpider:
- Open QR & Identifiers and press Scan QR.
- Press Scan label and allow the camera. Point it at the label. The device opens.
- If the camera is not available, use Or choose a photo of a label, or type the tag instead (below).
Type or scan a code¶
Use this with a keyboard or a USB or Bluetooth barcode scanner.
- In QR & Identifiers, press Enter a code. (On Assets, the box "Asset tag, plant ID or label" does the same.)
- Type or scan any of these: a BreachSpider label, an asset tag (for example
OC-0019), a plant equipment ID, a customer label, or an existing QR or barcode. - Press Find. The device's panel opens.
What you see on the device¶
The panel shows, from top to bottom:
- Your notes and Actions taken (Record an action), then Edit device and Remove device.
- The device's last check: its fix plan, findings with their sources, lifecycle, firmware and history. A device that was never checked says so instead.
- Asset identity: asset tag, record status (Edit tag and status) and Identifiers.
- QR label: Print label, SVG, PNG and Revoke and reissue.
- Maintenance: Log inspection, Record repair, Record firmware change and Schedule maintenance, with the device's work.
- Documents and configuration vault: the device's stored versions and their integrity (see Back up and verify a configuration).
Use labels you already have¶
If equipment already carries plant IDs, customer labels or older QR or barcode labels, link them instead of relabelling. Afterwards, scanning the old label finds the device too.
One code at a time, at the equipment:
- Press Enter a code, scan the existing label and press Find.
- BreachSpider shows No device has this code in this organization. with a form underneath.
- Choose the Code type (Existing QR or barcode, Plant equipment ID or Customer label), type in Search devices and pick the device, then press Assign. BreachSpider confirms "Assigned. The code now finds this device."
Many codes at once, from a spreadsheet:
- In QR & Identifiers, press Import identifiers.
-
Paste CSV into the box, or press Choose a CSV file. One row per code, three columns: device (asset tag or exact device name), type (
plant_id,customer_labelorlegacy_qr) and value. For example:device,type,value OC-0019,plant_id,P-101-PLC OC-0020,legacy_qr,4471-0093 -
Press Check rows. BreachSpider sums up, for example "1 ready, 4 with a problem (left out).", and each row shows Ready or its problem, for example Device not found, Looks like a network address (not stored), Type must be plant_id, customer_label or legacy_qr or Appears twice in the file.
- Press Import N identifier(s). Rows with a problem are left out. BreachSpider confirms, for example "Imported 1." Fix the other rows and import them again.
On a single device you can also add one by hand: open it, and under Identifiers choose the type, type the Value and press Add identifier. Each identifier has Remove next to it.