Executive Summary
CVE-2026-106018 is an authentication bypass in Johnson Controls EasyIO FW through version 3.0b25 that allows an attacker to reach protected controller functions through an alternate path or channel without presenting valid credentials. In a building or process environment these controllers sit on BACnet and Modbus segments driving physical outputs, so a bypass directly exposes setpoints, schedules, and actuator logic to unauthenticated manipulation.
Technical Exposure Breakdown
The vulnerability class here is CWE-288, authentication bypass using an alternate path or channel. In practical terms, the firmware enforces authentication on a primary interface but exposes an additional path, often a secondary service port, an API endpoint, a diagnostic channel, or a protocol handler, that reaches the same privileged functions without running the same credential check. The attacker does not break the authentication logic, they go around it.
The grounding data confirms EasyIO FW is affected through 3.0b25. It does not include a CVSS score, an assigned attack vector string, or a confirmed fixed version, so we will not assert those details. What we can state structurally is that these controllers are field devices. They are designed to be reachable by supervisory software, integration gateways, and commissioning tools. Any alternate channel that skips authentication is reachable by anything with network line of sight to the device, which in most building automation deployments is a flat or lightly segmented network.
Exploitation of an alternate channel bypass typically requires only network reachability and knowledge of the exposed path. No credential brute force, no session hijack, and no user interaction are needed once the alternate channel is identified. That lowers the skill floor substantially and makes this a strong candidate for inclusion in scanning and automation frameworks once the specific endpoint is documented.
OT Impact and Compliance Risk
EasyIO controllers commonly manage HVAC, energy, lighting, and auxiliary process loads. An authenticated-equivalent attacker can rewrite control logic, override schedules, disable safety interlocks implemented in application code, or force outputs to unsafe states. In a data center, hospital, or industrial facility, loss of environmental control is a physical availability event, not an inconvenience.
For operators under IEC 62443, this defeats the FR 1 identification and authentication control objective and undermines the zone and conduit model if the controller is trusted inside a security zone. For utilities with building and facility systems inside a NERC CIP electronic security perimeter, an unauthenticated path into a BES-adjacent device is a reportable access control failure. Water and wastewater operators under AWIA 2018 should treat any facility controller bypass as a risk and resilience assessment item. Where these controllers touch pipeline or compressor facility systems, map the exposure against TSA SD-02C access control and segmentation requirements.
Compensating Controls
Do not rely on a vendor patch as your only response, and do not run an aggressive active scan against production EasyIO devices to confirm exposure. These controllers can hang or reset under unexpected traffic, and a bricked HVAC or process controller is its own incident. Use passive asset discovery and span or tap based traffic inspection instead.
- Place EasyIO controllers behind a deny-by-default firewall or data diode where supervisory flows allow it. Restrict reachability to the specific supervisory hosts and commissioning workstations that require it, by source IP and port.
- Enumerate every listening service and management port on the controller through passive means and block all non-essential channels at the segment boundary. The alternate path being abused is often a port operators forgot was open.
- Deploy virtual patching at the segment gateway. A Suricata rule concept: alert and drop on connections to the controller management and API ports from any source outside the authorized supervisory allowlist, and flag protocol requests that reach privileged functions without a preceding authenticated session on the primary interface.
- Enable logging on upstream switches and firewalls for any new or anomalous flows toward these controllers, and baseline normal supervisory traffic so an alternate-channel probe stands out.
- Track vendor advisories for a confirmed fixed firmware build and schedule the update through a maintenance window with rollback planned, since field controller firmware updates carry their own operational risk.
BreachSpider Intel
BreachSpider tracks CVE-2026-106018 and related building and process controller exposures across the known exploited vulnerability catalog and vendor advisory streams for continuous OT monitoring.
